Search
Close this search box.

如何为SPC报告收集数据 - 自动和手动测量?

 
SPC, or statistical process control, is one of the most interesting tools in the context of quality management. Nowadays, this method is widely used in the industrial sector. During this process, data is gathered for report preparation base on control cards. Meanwhile, by gathering and displaying measurements in real-time, we are able to decrease the reaction time for a process that is becoming unstable by using condition-based monitoring.
Above all, the implementation of automated SPC enables you to better monitor process behaviour and faster discover issues in internal systems. How does it look like in practice? The basic idea is a data gathering system. This data – which is intended to be used in the preparation of the report – is based on control charts. By gathering the data and displaying the measurements – which is done in real time – it is possible to reduce the response time for this process, which requires monitoring. It is not only a question of planning and defining quality, but also of manual data gathering and automatic data gathering from production measurements. What do you need to pay attention to in this process?  

Manual gathering of data and possible challenges

It is worth highlighting that the traditional formula of data collection is a far cry from the challenges of daily life, which of course are dominated by ubiquitous automation. This is a path where one has to reckon, above all, with the possible delay of the information obtained. Manual data gathering leads to a lack of automatic notifications, such as the status of a part, to the quality department. However, manual data gathering cannot be reduced to this disadvantage alone. Others include:
  • uncontrolled measurements, e., no confirmation that the measurement was carried out at specific intervals and for a specific number of items,
  • unclear and inaccurate documentation,
  • double reporting when transferring measurements to and from paper into quality systems,
  • increased risk of human error,
  • lack of fast reaction when a process becomes unstable.
In this context, it is worth mentioning the widespread problem of communication. Though some process must be examined manually, manual measurements are necessary in certain cases. Manual processing of cards, can lead to errors that are remedied by automatic processing. Another problem is the lack of automatic feedback about the measurement – this applies both to results within and outside the accepted tolerance limit. In the context of communication – especially in more complex structures – the problem of manual data gathering can also be as mundane as the lack of up-to-date and user-friendly instructions and documentation on how to perform the measurement.  

Automatic data gathering – benefits of implementation

When comparing automatic data gathering to manual data gathering, it is hard to overlook that there are clear advantages in certain cases. The main advantage lies within the many possibilities of automatic data gathering – this concerns both the sources and the way of collection and processing in general. The increase in possibilities in this area can be seen in the collection of data, even directly at the level of machine automation. In addition, automating data gathering for the SPC report also enables the implementation of solutions such as
  • installing machine vision – cameras, scanners, x-ray devices – to obtain information for reports,
  • obtaining data from devices – g., scales, check weighers or machines with a specific application,
  • quality control with robots,
  • manual measurements by tools with automated data sending (ex. Bluetooth caliper).
Acquisition of data on quality parameters directly from the automation level; this applies, for example, to force, pressure, temperature and distance indicators. Of course, as with analyses based on manual data gathering – there is the question of communication. It is worth noting the difference seen on this level. In the case of the automatic form, there is a bidirectional communication with the MES system. This is done to automatically update the OEE and the analysis module with the quality level. In this way, you can expect, for example, quality plans and limits to be updated according to the item and production order levels.  

How does automatic data gathering work in the ANT system?

The implementation of technology provided by ANT uses a quality control module to simplify, speed up, and control the results of quality measurements. The increase in efficiency also applies to the way data is collected automatically. The system proposed by ANT focuses strongly on the issue of integration and interaction of the individual components of the overall system. This applies, for example, to the combination of cameras with the quality module and MES. It also considers the installation of sensors and the integration of hand-held tools. The communication system is worthy of mention since it is extremely intuitive. Most importantly, however, the user is guided step by step through the entire operating procedure – this includes how to take measurements. Manuals, documentation, pictures and films form the basis for this. Intuitive operation also characterizes the control panel. It guides the user through the quality control process with the help of automatic pop-up windows. These pop-up after a certain number of hours or other parameters – e.g., the number of pieces produced, or the materials created at a certain time after a changeover or failure. After entering the measured value, the system can compare the result with the quality limits. Here, too, the output of the data display is completely optional and can be adapted to, for example, the permissions of a given employee. Operators can therefore display a control chart for their shift and the selected parameter. If a certain measured value is outside the tolerance limits, the system automatically sends the relevant notification. The comfort of use is also influenced by:
  • variant to establish rules for triggering quality control,
  • labelling of samples and handling of instructions,
  • automatic generation of the SPC report in the form of control charts and histograms for various parameters.

Supporting in manually and automatically data gathering – choose it for your business

The benefits of implementing automatic data gathering go far beyond the considerable reduction of errors due to timely execution of the quality plan and identification of quality deviations. A very important point is the feeling of certainty – the guarantee that the quality of production in the factory is controlled according to standards. For production lines – but not only for them – early detection of unstable processes and faster response to quality results is vital. So it is all about efficiency – saving time and money through automatic report generation.

本条中的产品

订阅我们的时事通讯,了解更多信息

查看我们的人工智能助手
点击按钮 ➞

观看 MES 演示并在 3 周内进行试点

工业软件专家

Łukasz Iskra

工业软件专家

ǞǞǞ

[email protected]

为什么要得到一个演示?

  • 一个60分钟的在线会议,由专门的专家介绍与您类似的行业中的顶级系统
  • 现场建模 你的生产过程的
  • 会后的预算报价

留下您的电子邮件或电话号码

我们将立即与您联系

通过我们的案例研究了解更多有关市场拓展服务的信息

欢迎回来

查看 MES 投资回报率

下载注塑机行业投资回报率(ROI)文件

嘿,看来你对生产用的软件感兴趣...

注册通讯,获得目录,与同事们分享